simple precision
 

KAM Products

KAM OWD Oil Water DetectorKAM ML Measurement LoopKAM OID Optical Interface DetectorKAM CHA Colorimeter / Haze AnalyzerKAM KF Karl Fischer Moisture AnalyzerKAM UFM Ultrasonic Flow MeterKAM CSS Complete Sampling SystemKAM SMP Static Mixing PlateKAM SMS Static Mixing SpoolKAM IT Insertion Tool

KAM UFM Ultrasonic Flow Meter

The KAM UFM Ultrasonic Flow Meter provides highly accurate flow measurement in a full range of liquids. Because it has no moving parts, viscosity and varying flow rates won’t affect accuracy–nor will slippage. And it won’t suffer from the mechanical deterioration or sensor wear experienced with many conventional flow meters.

Over a decade of research has gone into the KAM UFM flow meter’s sensor head to minimize electrical interference and completely eliminate mechanical noise. This allows KAM UFM flow meters to operate over a very large flow range (100 to 1 standard turn down ratio) with an output that is directly proportional to flow.

Because KAM UFM flow meters insert directly into the pipe, they won’t experience signal loss through the pipe wall. And the sensor is able to be located in the most representative point in the flow profile.


HOW IT WORKS

  • The ultrasonic sensor transmits a known frequency into the most representative point in the flow profile of the moving stream. This signal reflects off a particle in the moving stream and returns to the sensor at a different frequency. Fluid velocity can now be determined using the Doppler principle or Doppler shift–the difference between the transmitted and received frequencies.

KEY KAM ADVANTAGES

  • Built-in temperature sensor
  • No moving parts
  • Easy to install and calibrate
  • Meter factor correction switch
  • EX Enclosure suitable for Class 1, Group D explosion proof

APPLICATIONS

  • Marine loading, unloading, lightering
  • Blending
  • Leak detection systems
  • Sampling
  • Fluid measurement for: crude oil, water, wastewater, muds, pulp, brine, and slurries

KAM UFM Ultrasonic Flow Meter - Specifications

SPECIFICATIONS

Media: Crude oil, refined products, water, wastewater
Material: Wetted parts – 316 stainless steel
Fluid temperature: -40º to 250ºF (-40º to 125ºC)
Electronics temperature:  -40º to 160ºF (-40º to 70ºC)
Power requirements:  12–24 VDC
Accuracy:  1% of full range
Turn down ratio:  100:1 (0.3–30 ft/sec)
Output:  1 pulse per barrel, 1000 pulses per barrel,  or optically isolated output
Mounting:  2” MNPT seal housing
 2”, 3”, or 4” flanged seal housing
Pressure rating:  ANSI 150, 300, 600, 900

Sensor dimensions:

 

 1.25” W air foil x 2.8” H (32mm x 71mm) 
EX Enclosure:  3” x 6” x 3” (76mm x 152mm x 76mm)
Shaft length:  12” to 60”
Pipe size:  2” to 48”
Weight:  from 10 lbs. (4.5kg)   

KAM UFM Ultrasonic Flow Meter - Models



KAM UFM Insertable

Insertable UFM™
on a main pipe,
with 2”, 3”, or 4”
flanged seal housing

 

 




KAM UFM Insertable with MNPT Seal Housing

Insertable UFM™
on a mainpipe,
with 2” MNPT
seal housing




KAM UFM Ultrasonic Flow Meter - Documentation



Literature


Manuals


 

Website Design by FirstLink Technology, Inc.