UFM Ultrasonic Flow Meter
The UFM Ultrasonic Flow Meter provides highly accurate flow measurement in a full range of liquids including crude oil and refined fuels. Because it has no moving parts, viscosity and varying flow rates won’t affect accuracy–nor will slippage. And it won’t suffer from the mechanical deterioration or sensor wear experienced with many conventional flow meters.
Over a decade of research has gone into the UFM flow meter’s sensor head to minimize electrical interference and completely eliminate mechanical noise. This allows UFM flow meters to operate over a very large flow range (100 to 1 standard turn down ratio) with an output that is directly proportional to flow.
Because UFM flow meters insert directly into the pipe, they won’t experience signal loss through the pipe wall. And the sensor is able to be located in the most representative point in the flow profile.
HOW IT WORKS
UFM Ultrasonic Flow Meter - Specifications
|Media:||Crude oil, refined products, water, wastewater|
|Material:||Wetted parts – 316 stainless steel|
|Fluid temperature:||-40º to 250ºF (-40º to 125ºC)|
|Electronics temperature:||-40º to 160ºF (-40º to 70ºC)|
|Power requirements:||12–24 VDC|
|Accuracy:||1% of full range|
|Turn down ratio:||100:1 (0.3–30 ft/sec)|
|Output:||1 pulse per barrel, 1000 pulses per barrel, or optically isolated output|
|Mounting:|| 2” MNPT seal housing
2”, 3”, or 4” flanged seal housing
|Pressure rating:||ANSI 150, 300, 600, 900|
|1.25” W air foil x 2.8” H (32mm x 71mm)|
|EX Enclosure:|| 3” x 6” x 3” (76mm x 152mm x 76mm)
|Shaft length:||12” to 60”|
|Pipe size:||2” to 48”|
|Weight:||from 10 lbs. (4.5kg)|
UFM Ultrasonic Flow Meter - Models
UFM Insertable with MNPT Seal Housing